[bkbishop]

Hi,
I have a 2000 Sahara. Recently I noticed I can remove the key from the Lock Cylinder while running. I also noticed the steering wheel doesn't lock when the ignition is turned to the off position and the key is removed.

Has anyone experienced this with their wrangler?
Is this the cylinder or the Ignition Switch Actuator Pin?


I was thinking the Lock Cylinder / key is worn and just need to be replaced. If I order a replacement Lock Cylinder is it possible to have it re-keyed to match my keys? If I am better off just ordering the Lock Cylinder /w keys what, if anything, do I need to do since they keys are chipped?

Crown Automotive 5003843AA - Ignition Cylinder for 97-06 Jeep® Wrangler TJ & Unlimited, 97-01 Cherokee XJ, 99-04 Grand Cherokee WJ & 02-07 Liberty KJ - Quadratec
or
Crown Automotive 5003843AAK - Coded Ignition Cylinder with Keys for 97-06 Jeep® Wrangler TJ & Unlimited, 97-01 Cherokee XJ, 99-08 Grand Cherokee WJ & WK - Quadratec

Thanks

 

[bkbishop]

Thanks for the explanation!

Both keys do the same thing, but they look worn. I thought about having a new key made (without the chip) to see if that confirms the cylinder is bad.

It sounds like I need a new lock cylinder? I found this one on amazon and it looks like I can change the tumbler to fit my existing keys.

http://www.amazon.com/gp/product/B0...liid=I207DICGNC3QDW&ref_=wl_it_dp_o_pC_nS_ttl