Joined
·
12,108 Posts
Just FYI, it's a good idea to recheck your toe-in adjustment after you've driven it a few miles. After having the suspension torn apart, it takes a little time for everything to kind of settle in which will change your toe settings some.
An easy way to check quickly is to just slap a piece of duct tape directly across from each other on on the front of both front tires (I usually put them right next to a tread lug so I can hook a tape measure over it), then put a sharpie mark on each one. Measure across from the edge of the tape on one to the edge of the tape on the other at the sharpie mark, then move the jeep until the tape is facing the back and take another measurement from the same place.
An easy way to check quickly is to just slap a piece of duct tape directly across from each other on on the front of both front tires (I usually put them right next to a tread lug so I can hook a tape measure over it), then put a sharpie mark on each one. Measure across from the edge of the tape on one to the edge of the tape on the other at the sharpie mark, then move the jeep until the tape is facing the back and take another measurement from the same place.
