Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,193 Posts
Discussion Starter #1
Sometimes when I'm driving, my brake warning light indication will come on. And even more so, it comes "half-on". Like, the light illuminates, but not fully. The light does go to full bright when I set the foot brake. But this problem is really annoying me when I drive.

I check the fluid level and lines, and also the brake booster hose, all looks good. What do you think it could be?

Here's a pic of the light "half-on":
I engaged my 4WD to show yous the difference in intensity:



View attachment 270745
 

·
Registered
Joined
·
1,610 Posts
What year? Cause my 95' will flash every now and then. It's only cause the PB pedal has free play in it and the sensor is not adjusted correctly.
 

·
Registered
Joined
·
1,193 Posts
Discussion Starter #4
What year? Cause my 95' will flash every now and then. It's only cause the PB pedal has free play in it and the sensor is not adjusted correctly.
It's a 91, the parking brake pedal does have a slight play in it... I'll check it out though.


Check the switch at the emergency brake. It's possibly not properly grounded.
I'll definitely look into that, I did take out the PB Pedal assembly and painted it last year, but I haven't had any problems until now.
 
1 - 4 of 4 Posts
Top