Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
236 Posts
Discussion Starter #1
I am in the process of installing some OTTRATW switches on my a-pillar. I am trying to hook them up to the dimmer circuit. I have read to pull from the orange/grey wire for dimmable power. I've also read that you need to pull the dash or at least the power window switches to access this "Orange/grey" wire.

I was wondering if the orange/grey wire in the wire harness for each door was the wire I'm looking for? It is right next to an orange/white wire. The little lights on the door locks each dim when adjusting the brightness of the dash lights, so I believe this is correct.

Would I be able to tap into this wire for my switches?
 

·
Registered
Joined
·
236 Posts
Discussion Starter #4
Thanks!
 
1 - 4 of 4 Posts
Top