[BlueBabySound]

I'll submit our 2018 JK.

Teraflex CRD60 rear axle and Tera44 front, both with 4.88 gears and ARB lockers.
Teraflex Alpine 3" Lift
Steersmarts TR, DL and TB.
US Wheel Rat rod series, custom powder coat
37x12.5x17 Cooper STT Pro

Full specs on the build page in my sig.

 

[Ny2719]

This is my 1992 jeep yj 2.5l
32x11.5r15 MasterCraft courser mxt
Rough country 4" lift kit
4"-6" rough country sway bar disconnects
Smitty built rear bumper
Hard top
Hard doors
Half doors
Smitty built soft top
10" subwoofer
Full engine rebuild
Rear lunchbox locker

 

[Randy Streeter]

2016 jku sport
3.5 rough country lift
Aeg front stubby bumper with rough country winch
Cold air intake
Self chopped fenders
Light bar and ditch lights.
as many red accents as I can find
Rough country License plate quick detach
33” tires at the moment

 

[Harjan]

Hi everyone, from Aruba my regards!
Bought this Wrangler TJ 2005 end of '19, spend a lot of work on it.
Homemade bull-bar, selfmade sidesteps and a 3inch liftkit.
Also I did a whooooole lot of metalwork, new iron under bodymounts and welded a lot of holes, because the previous owner wasn't good for her!
Also painted the interior with red accents.

Kind regards from a sunny island in the Carribean!
Harjan

 

[Harjan]

Hi everyone, from Aruba my regards!
Bought this Wrangler TJ 2005 end of '19, spend a lot of work on it.
Homemade bull-bar, selfmade sidesteps and a 3inch liftkit.
Also I did a whooooole lot of metalwork, new iron under bodymounts and welded a lot of holes, because the previous owner wasn't good for her!
Also painted the interior with red accents.

Kind regards from a sunny island in the Carribean!
Harjan

P.S. It's a 4 liter 6 inline with a flowmaster. Love it, but she drinks more than me! ;-)

 

[badmag71]

 

[memorypolice]

Here i have my daughters soon-to-be 2021 Barbie Wrangler

I still have a bit of work to go but just finished up all of the wiring and soldering this morning of all the harbor freight lights I could find to make work. took a ton of Dremel work to make it all fit but, working lights are better than stickers, eh?

I know this probably isn't eligible, but I've put over 50 hours into this thing and figured I would share it. Good luck to the actual participants!

 

[jrockwell]

 

[SilverbulletJKU1775]

Daily Driven 2013 JKU Sport Billet Silver

K&N OEM air filter replacement
Badlands APEX 12K winch
Grey Factor55 Flatlink E with rope guard
-EAG stubby bumper with Amazon fogs and bow shackles
Highbeam Offroad Drifter series headlights
JW Speaker turn signals
Amazon fog lights
Amazon aluminum hood latches
JKS 0”-2” Quicker disconnects
Teraflex sun reflector/ shade
KBD Fenders with 3/4 LED parking lights
ACE inner fender liners front and rear with front insert pieces for body gap
-2016 JKU Rubicon Recon Suspension takeoff’s (4-door with hard top, steel bumpers, & full doors) with 1.75” front poly spacer and .75” rear poly spacer from Rubicon Express
Metalcloak durospring bumpstop replacement
ARB D44 red rear diff cover
Revolution Axle chromoly rear shafts
Rubicon rock rails
Ronin antenna
custom decals (flag, handle, name etc.)
Toyo Open Country A/T ii’s(285/70R17)
Fuel SHOK D664’s
Carpet removed entirely
Weather tech all around
Fishbone offroad maglight mount
Scosche DVD slot phone mount
Broadway 300mm. Convex rear view mirror
Slickrock JK Pockets
Grabarsusa Grab bars
Amazon soft grab handles
Innovative AT products rear seat recline kit
Bartact Fire extinguisher rollbar mount
-Some mystery brand steel rear bumper with bow shackles and receiver which I put a reese recovery loop in
19% tint for the Southern California sun
Amazon locking fuel cover
ANZO Led Tail lights
Metalcloak Sportgate
Metalcloak Hi Lift mount with 48” cast with hi lift handle keeper and newer neoprene cover
Metalcloak license plate relocation bracket
Mopar license plate delete plate
Mopar door surrounds (cable style)
Bestop cable style bikini top
Bestop Tonneau cover

My favorite memory is hands down a run at Corral canyon being the hardest black diamond trail I’ve done to date. We went with a forum member I met on here with our simple budget builds, and two rigs with lockers, 35’s and 2.5”+ lifts. We made it through with just enough fun but also challenge to make for a memorable trip.

 

[Mudman1]

Hello! This is my 2018 JK Rubicon Recon 6spd manual. The member here who does stats says it is 1 of 1. Bought new in 2018. 87,800 miles on it. No rear seat...sold after 3 weeks. Here is the list, as best I can remember:

• Mopar hardtop headliner
• Rigid rock lights in the fenders
• Rigid Dually diffused and SR-20 Combo on the front bumper
• Rigid Ignite diffused in the rear bumper
• VisionX Solo diffused under the rear bumper
• Warn VR8-S and Maximus-3 hoop on the front bumper
• REDARC trailer brake controller and Mopar 7 pin harness
• Mopar engine block heater
• FIA grill screen
• BFG KO2s in factory size
• Teraflex ball joints and HD steering kit (drives better than new)
• Quadratec aluminum engine, trans, transfer case skid plates
• JKU Recon springs
• Raingler nets for the attic and sides
• Fishbone Offroad wheel well storage tubs (made in CHINA)
• Trailgater tailgate table
• Teraflex HD tire carrier
• Teraflex Alta Cargo Rack
• RotoPax mounts, two, inside on roll bars for 2gal water containers
• RotoPax mounts on Alta Rack for gas containers

THANK YOU FOR YOUR VOTE!

 

[NovaJeeper540]

Hello,
I’m Lee ASE master and former FCA technician, just joined and nice to see all the cool Jeep’s. I love mine so I figured I would share.

2003 jeep TJ X 5 speed 4.0
I got her from auction from original owner Florida jeep so zero rust and frame is solid.
I have done all the modifications myself, most just to be better in snow and mud since I live in the Shen Valley. It’s my daily to city every day over 100 miles and she still kicks.
My modifications:
-upgraded stock open 3.07 differentials to Eaton Detroit lockers and 4.56 gears.
-BFG 33 12X50 all terrain tires(love them)
-re painted from Patriot Blue to Flat camo and Jurassic park stickers.
-American racing wheels
-3 inch body lift
-2 inch skyjacker suspension lift and shock kit.
-Crown fatter and stronger front tie rod bar and ends and Drag link bar.
-rebuilt and tuned gearbox
-adjustable lower front Arms from rugged ridge.
-XRC front bumper and 9,500 lb Winch.
-KC 6’ daylight spot lamps.
-removed carpet and insulated sprayed inside floors and have the removable plugs for drainage.
-Jvc stereo and kicker speakers.

My favorite memories are the building fun and painting, also all the people and kids stopping me to take pics.

 

[-lenny-]

Here is mine, bone stock 21 JLUR EcoDiesel. First order of business is ceramic tint all around and PPF, booked in Feb 11. Then I want to upgrade to LED lights...

 

[Jetskiguy69]

New year, new round of ROTM contests!
Welcome to the first ROTM contest of 2022!

View attachment 4531535
Sept 2021 ROTM winner @Jimbo8v92

Thank you to everyone who contributed to any of last year’s ROTM contests.
The goal is to pit the 12 winners of this year’s contests into a Ride of the Year contest in January of next year.

Thank you for your patience! And Good luck!

Please follow all instructions posted below

1. You must add 3 Photos; no more, no less. NO Collages. Pictures must be of the current state of your vehicle. Avoid having any people in your images.
2. List any/all Legal Modifications to your vehicle if you have done any.*
3. The vehicle must be yours. Vehicles waiting to be purchased may not be included
4. Include a short description of your favourite aspect of your vehicle, or your favourite memory or ride taken with your vehicle*
5. Votes for the month’s winner will be tallied by the number of “Likes” your post has on the last day of the month. The winner at the end of the month will win a free 1 Year Premium Membership for the forum and a custom flair under their username. If the winner is already a premium member, their subscription will be extended an additional year.
6. Remember, please post your entries and pictures in this thread.
7. If you have won in a previous month, you can no longer enter for the rest of the year. However, if you have a second car that meets the above criteria, you can enter that.

* These are optional but encouraged

~Richard

 

[Jetskiguy69]

2008 Wrangler X
Add ons include Rubicon Decals 🙈
EAG Front bumper
Xprite 7” LED Halo Headlights
Xprite 4”LED Fog lights
Xprite clear lens amber front turn signals
Centric Wheel adapters 5 lug to 6 lug 2” spacers
Ford Raptor 17” Bead lock wheels with 33 X 12.5 Otani 10 ply tires

 

[SilverbulletJKU1775]

2008 Wrangler X
Add ons include Rubicon Decals 🙈
EAG Front bumper
Xprite 7” LED Halo Headlights
Xprite 4”LED Fog lights
Xprite clear lens amber front turn signals
Centric Wheel adapters 5 lug to 6 lug 2” spacers
Ford Raptor 17” Bead lock wheels with 33 X 12.5 Otani 10 ply tires

Post pics of these raptor beadlocks on a jeep!!

 

[Jetskiguy69]

Post pics of these raptor beadlocks on a jeep!!

 

[Jetskiguy69]

Post pics of these raptor beadlocks on a jeep!!

 

[Jetskiguy69]

Post pics of these raptor beadlocks on a jeep!!

I edited my post and added the 3 photos. Tell me what you think

 

[willysdave]

'61 Willys wagon with a chevy K5 Frame, sbc 383 stroker, Holley 650 Truck Avenger carb., vic Jr. intake, headman headers. TH400 with stage II shift kit, Dana 300 with twin stick and 4:1 low max gears. D60 front, 14 bolt corp. in back with ARB lockers. Hydro 4 disc brakes and PSC hydro assist steering. front 4 link with King coilovers. Autometer Phantom gauges ,cheap bucket seats, and fully insulated. Still has leaves in the rear. 38x14.50x17" MTRK's on steel wheels. Custom front bumper with a Warn M15000 winch. It's quit capable and a lot of fun getting it to do things it wouldn't have dreamed of in it's previous life of being all stock. I also have a capable JKUR but, we've seen enough of them right ? lol