Jeep Wrangler Forum banner

JK 2dr coil spring on JKU 4dr

1K views 8 replies 6 participants last post by  DirtyTeddy 
I don't have specific data as far as spring rates. I have a AEV 2.5 with my jk I added around 300lb of weight not counting wheels and tires. it sagged roughly a inch. I would imagine they would be 2.5-3 for you with a slightly softer ride. Before I added the weight I had 3.5 and it was very stiff. 300 is not far off from the added weight of a JKU. If you're planning on adding armor and a winch I would recommend just getting 4dr sprigs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top