Jeep Wrangler Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,922 Posts
Discussion Starter #1
I looked up the parts for the hard top. I found the 6 rear fasteners that will work and I also found the 2 knobs that go into the rear of the freedom panels. But there is no listing for the two bolts at the top front of the main hardtop section.

Anybody know the exact size, thread pitch, and length of these two bolts? Apparently the 2-door doesn't have them. It's a 4-door pair of bolts only.
 

·
Registered
Joined
·
26,921 Posts
Same screw as used for the rear of the hardtop. Part number is 6506826AA.
Torx head, M8x1.25X25mm.
 

·
Registered
Joined
·
2,922 Posts
Discussion Starter #3
Thanks!
 

·
Registered
Joined
·
2,922 Posts
Discussion Starter #5
Dealership gets $5.42 EACH for these bolts. GASP.
 

·
Registered
Joined
·
771 Posts
Don't know where or what (have 2 door), just take two from the back and use those in the front, and get any head shape for the back for way less. If there are 6 in the back probably be fine with just 4 anyway.
 
1 - 6 of 6 Posts
Top