Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Group, I have spent a fair amount of time searching the forum to see what people have done with their OEM wheels, and I haven't found anything so far. I purchased this jeep as a backup vehicle that we plan to take to off roading 1x per month and other than that it is a snow vehicle and nice day top down vehicle. I am planning on putting a 2" suspension lift and would like to increase my tire size (you can see the tires are worn). I would like to keep the OEM wheels, what is the largest tire size I can put on these wheels?
 

·
Registered
Joined
·
3,087 Posts
32/10.50/15 would be good
That size would be very limited if even easily available.

OP, a 10.5" wide tire on stock wheels would work fine with a few washers to the steering stops to avoid rub at full turn. Going up to a more common 32x11.5 or 33x12.5 will require about 1"-1.5" wheel spacers along preferably 3-4" lift.
I would add a 1.25" BL to the 2"SL if you plan on going with 32's.

I believe the OEM Cannons are 15x8 with a 5.5" backspacing. IMO, get new wheels with the right BS if you plan on going big. Not a fan of spacers.
 
1 - 5 of 5 Posts
Top