Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have replaced all of the bulbs on a 2010 Jeep wrangler with led bulbs using the stock housings. I put load resistors on each one that blinks. When I put in the final rear passenger side brake/blinker bulb some odd things happen. When the blinker is on the left side has a faint flash also. The parking light does not come on on the right rear either. Brake seems to work just fine.
Any ideas or suggestions greatly appreciated.
 
1 - 2 of 2 Posts
Top