Jeep Wrangler Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,782 Posts
Discussion Starter #1
One of my factory tail lights was running running kinda dim and had a crack in the housing. Had a couple of folks mentio it to me at traffic lights. THat was just enough of an excuse to order a set of replacement lights from Ebay for $89 for the SET!!! (local shops charge $79 EACH)

I made sure they had the LED back up lights and the LED license plate lights.

Installation was a breeze and only took about an hour (with liesurly coffee breaks).

They look AWSOME. If I can figure our how to post pics, I will do so.

No they arent round and they arent flush mount. They are just like OEM...but are LED.

My only regred....is that they do NOT have the side maker LIGHTS....only side reflectors.

I also have the "hyperactive flasher" due to decreased load.... certainly gets attention. Eventually, I might get the after market flasher selenoid that goes with the LED lights....but not a priority at the moment.

So..... if you are looking for tail light options....I like these.

again....ebay....$89 per SET....free shipping.
 

·
Registered
Joined
·
3,042 Posts
i went with the flushmount led lights, for $50 i got the lights, gromets, wire harness, plate light, and resistors shipped. took around an hour to do.
 

·
Registered
Joined
·
7,150 Posts
Yeah, I had less than $50 in my whole LED taillight project.
 

·
Registered
Joined
·
3,042 Posts
yeah i paid for the 2 day shipping on everything and thats what took it over the 50
 

·
Registered
Joined
·
5 Posts
LED tail light conversion

Question
What size hole saw did you use for the grommit tail light conversion?
Thank You
 
1 - 6 of 6 Posts
Top