Jeep Wrangler Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
Anyone else have a issue with a 52 inch light bar. Have a 2014 jeep wrangler with mounting brackets and the led itself that sits above windshield but whenever I drive the bolts get loose and the light bar faces up. I've tried tightening it as much as I can. Tried lock tite
But nothing


Sent from my SM-G928W8 using Tapatalk
 

·
Registered
Joined
·
533 Posts
What I did on mine was to install the rubber washers that you use in a garden hose between the light bar and bracket. It gives a little more grip to hold the light in place. It does move a little every couple hundred miles, but just slightly.
 

·
Registered
Joined
·
428 Posts
might try a lock washer between the light bar and the bracket
 

·
Registered
Joined
·
2,319 Posts
what did the vendor tell you what to do?
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top