Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter #1
This summer I wired my lightforce 210's, using their harness, to my own switch. They work independently of the high beam and I can turn them on while the vehicle is off. Now I want to wire them to the factory fog light switch (97 TJ). So, my question is what wires do I need to splice the brown wire (beam connection ran to a relay) and the black/red (switch connection) in to?
 
1 - 2 of 2 Posts
Top