Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter #1
I realize the drive-train on the jeeps are always somewhat loose but whenever I hit small bumps, say a cobblestone road, it feels like the transfer case and pedals are very loose. I also hear a bit of a clunk/rattle when I start the jeep sometimes.

Can any one recommend a general area to possibly go back and start tightening some things, etc... going to check the upper control arms tonight as I had a lift installed a few months back.
 
1 - 2 of 2 Posts
Top