Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
Just got a new to me 89 4.2. In the process of fixing a few things, changing some fluids & just getting her up to speed. One thing that is bugging me is the low beams are not working. I am not getting anything to the headlights. Any thoughts of this being a switch problem or other ideas.

Thanks for any insight.
 

·
Registered
Joined
·
635 Posts
The hi/lo switch is on top of the column under the dash. It may be your problem. Usually if you have an either/or problem on both lights its the switch
 

·
Registered
Joined
·
458 Posts
90DesertTanYJ said:
The hi/lo switch is on top of the column under the dash. It may be your problem. Usually if you have an either/or problem on both lights its the switch
X2 give your switch located on the steering column a good clean also clean your connectors that attach to the head lights. I would also clean all the grounds also. I just did this and it fixed my hi beam problem. Good luck!:) I used steel wool to clean mine.
 
1 - 5 of 5 Posts
Top