Well, a week ago the TF leveling kit went on the '13 2Dr Rubicon. It still has a rake. Without measuring I can eyeball at least 1"-2" difference between the front/rear. The rear spacers were not installed. I have an ORFab heavy front bumper and 10K Engo winch. I installed the same leveling kit on a 4DR (same bumper and winch) and the level was almost perfect. Install was double checked for correctness. What do I have to do to obtain a more level stance. Other than the leveling kit all other suspension parts are stock. Are different springs the answer? In order to go a little higher to obtain a better level ...Will that involve and other mods to the suspension or driveline. I hope my question make sense , kind of a rookie here.