Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
so after I narrowed everything down to solve my dreadful no start problem turns out the ecu on the jeep is a manual ecu it takes time to kick in but does it matter if its a manual ecu on an auto or no. I have a 95 2.5l.
 

·
Registered
Joined
·
29 Posts
Discussion Starter #2
no start meaning I would have to wait until the ecu kicks in and hear the multiple clicks from the relay box then it starts up.
 
1 - 2 of 2 Posts
Top