Jeep Wrangler Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
So i got a 1991 jeep wrangler and i have fixed the dash speakers to polk audio speakers the 4x6 coaxial ones and a new blaupunkt radio Atlanta 110 model and got the wire fixed in the driver side speaker. But for some reason when i want to turn up the radio the speakers start making that blowing/spitting sound whats making this happen and would a amp help?
 

·
Registered
Joined
·
221 Posts
Make sure that you have them wired right + to + and - to -. Those Polk speakers are really testy with that, if you get it wrong they sound horrible.

It is common enough it would definitely be worth a look.
 

·
Registered
Joined
·
513 Posts
Irg670 said:
I checked everythings fine as + and - connecting but will a amp help someone just answer that i've heard of it helping
If you head unit is not putting out enough power and that's causing your problem, then, yes an amp would help. Get one with as many Channels as you have speakers to hook up to it. (ex. 4 speakers, 4 channel amp). GL
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top