Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter #1
I just joined and just recently became a "partial" jeep owner... I bought a 1998 TJ with a missing front clip and no engine/trans. I am going to put a GM small block in it, but first, I want to pull the tub off and have it media blasted and re-painted. I also need to find a front clip at the same time.

Any advice on who does good work for the media blasting, paint and body work, as well as, a source for body parts in or around Boise? Also, is there anything specific to address during this process?

I'll probably coat the frame with POR 15 while it's apart.
 
1 - 1 of 1 Posts
Top