Jeep Wrangler Forum banner
1 - 2 of 10 Posts

· Registered
120 Posts
From what I understand the system is very difficult to bleed if I can be at all. The cap for the fluid can be stubborn sometimes but you just have to put a lot of power to take it off. If you did get air in the system though you might want to look at buying a pre bled kit. I think there around 100$. But it is normal to have very little resistance when the clutch is new. I did mine a few months back and had basically no resistance for about the first 2 weeks then it started to have more and more resistance till I felt normal again. As long as it's functioning properly I would give it some time to break in
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.