Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I recently acquired a 94 4 cyl. It has sat for a couple of years and am in the process of bringing it back to life. The motor turns over, but there is no juice to the coil or the fuel system. I started by checking all fuses and electrical conections but to no avail. My next step is to look at the pcm. Is there anything glaring that i'm not seeing?
 

·
Registered
Joined
·
227 Posts
I recently acquired a 94 4 cyl. It has sat for a couple of years and am in the process of bringing it back to life. The motor turns over, but there is no juice to the coil or the fuel system. I started by checking all fuses and electrical conections but to no avail. My next step is to look at the pcm. Is there anything glaring that i'm not seeing?
Have you checked to see if there is electricity after the ignition module?
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #4 ·
pcm

are powertrain control modules year specific? will a unit from a 1991 fit a 1994, given that the engine, tranny and everything else is the same?
 
1 - 4 of 4 Posts
Top