Jeep Wrangler Forum banner
1 - 1 of 4 Posts

· Registered
226 Posts
I recently acquired a 94 4 cyl. It has sat for a couple of years and am in the process of bringing it back to life. The motor turns over, but there is no juice to the coil or the fuel system. I started by checking all fuses and electrical conections but to no avail. My next step is to look at the pcm. Is there anything glaring that i'm not seeing?
Have you checked to see if there is electricity after the ignition module?
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.