Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of January's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
876 Posts
Check fuse 26 in the Power Distribution Center and the Auto Shutdown Relay... If either one of these is bad, you won't get power to the coil rail. If they are both good, then you are looking at a bigger problem, as the control voltage comes from the Powertrain Control Module.

I hope that you find out it's a simple problem!
 

·
Registered
Joined
·
876 Posts
Sorry I couldn't be more help... koopzz may be on the right track though. Hopefully some of the other folks will chime in soon with ideas!
 
1 - 2 of 2 Posts
Top