[Etabetasig]

Hi!

Have a 2012 JKU

Here in nor cal and need some help with battery connections. Put winch on 2 years ago and had battery connection issues which were resolved by tightening the cables/terminals.

Issue has come back and I don't know if I have fully resolved. Carrying a spare 10mm socket while doable, is not long term as I am a spaz with tools.

Came out from work and no juice to car. Another guy helped figure out it was battery terminal issue. Not sure if I tightened correctly.

Anyone in nor cal, if I drive to you, will you check it out for me? Im in Concord/Oakland area.

I can buy you beer. I'm at the end of Resources.

Thank you in advance.

Dave
[email protected]

 

[Etabetasig]

Give this a go: Remove the terminals completely, clean the inside of the terminals and the battery posts (very inexpensive tool at autozone or the like), then reinstall and make sure they are tight. If you can move them with your hand they are still loose. Do the same for the other connections on the terminals.

Thank you. I will stop by store on way home tonight and try out.

 

[Etabetasig]

I really appreciate the feedback including what you use.