Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
Hi folks,

My O2 sensor (there's only 1 in my system) that's close to the exhaust manifold (95 YJ, 2.5l) goes from the pipe, to the connector near the motor mount on the driver's side, but there is nothing plugged into that plug. No wires hanging that I can see. Can anyone please post the other end of the connector and where it goes to?

Thank you all!!

Shawn
 
1 - 4 of 4 Posts
Top