Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
Does something exist, or do the parts exist for me to build a plug and play wiring harness to add an amp to the factory system? I have the 430N and want to keep it...I'm not against building a wiring harness, I'd just prefer not to cut up the factory wiring to add an amp, so that it's easy to take it with me if I move vehicles. I'm thinking of doing the AudioControl LC-6.1200 for simplicity purposes, since it has a LOC, remote turn on sensing, signal summing and will correct for bass rolloff all in one unit.

http://www.audiocontrol.com/car-audio/power-amplifiers/lc-61200/

I'm thinking I should be able to build a harness that fits behind the radio, send a pair of 9 wire cables (https://www.crutchfield.com/p_1429WC1820/EFX-9-Wire-Ultra-Flex-Speaker-Wire-20-feet.html?tp=1127) to and from the amp, then just run a cable for channels 5 and 6 bridged to a sub in the back.

Thoughts?
 
1 - 3 of 3 Posts
Top