Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1
Hey guy, just wanted to share a quick relatively inexpensive mod I put on my sons JKUHR this past weekend. I noticed that Jeep does not have an engine bay light. So, I ordered 2 KC Cyclone lights and wired them into the Spod. Basically I popped out 2 of the plastic holders for the hood insulation and mounted the lights using some new door panel push screws that fit inside the light itself.

image-3191566771.jpg

Once the lights were in place I wired them up and ran the wiring behind the hood insulation and into the sPod. It's awesome ! I'm sure this mod has been performed many times.

image-2438026728.jpg



image-2552565778.jpg

I was quite pleased at the results.
 

·
Premium Member
Joined
·
1,142 Posts
good mod! The results look good. I have to admit I've never heard of KC cyclones, but I plan to use some in the future - they look slick!
 
1 - 2 of 2 Posts
Top