Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Its been a while since I have had to engage the rear locker but did and now it won't disengage.... tried different combinations to disengage but still blinking and locked in. Any suggestions?
 

·
Premium Member
Joined
·
695 Posts
Axle lock will disengage if the vehicle is taken out of 4L (Low) range, or the ignition switch is turned to the OFF position.

It will blink until fully disengaged / engaged.

If it is still not working correctly, might need a dealer visit.
 

·
Registered
Joined
·
1,828 Posts
1 - 5 of 5 Posts
Top