Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 8 of 8 Posts

·
Registered
Joined
·
214 Posts
Discussion Starter · #1 ·
Tied replacing bulbs didn't help. Reverse light brake light turn signal and hazards work but no running lights. WTF!?!?! :)
 

·
Registered
Joined
·
1,141 Posts
Check your fuse block for blown out fuses. Had it happen with trailer wiring before...bad directions...running lights went out, but everything else worked. Hope it helps
 

·
Registered
Joined
·
214 Posts
Discussion Starter · #3 ·
Tarby said:
Check your fuse block for blown out fuses. Had it happen with trailer wiring before...bad directions...running lights went out, but everything else worked. Hope it helps
I just got this thing yesterday and I just looked at the fuse box and it's a mess under there. I will look into it tomorrow. Thanks
 

·
Registered
Joined
·
214 Posts
Discussion Starter · #4 ·
Checked the fuse and it is fine. Anymore ideas? Should I get all new assembly? I really need to get this figured out.
 

·
Registered
Joined
·
2,303 Posts
Check your light switch for connections and damage.
 

·
Registered
Joined
·
11 Posts
There's gotta be a bad connection somewhere. Or a possiable bad light bulb. But I would recommend looking for damaged wiring or bad connection of such.
 

·
Registered
Joined
·
2,303 Posts
Glad to hear it...
 
1 - 8 of 8 Posts
Top