Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
25 Posts
Open the back end, reach in and pull the latch on the top center of the seat while you push forward. This will rock the seat forward exposing the floor latches or hooks. You will see the seat become disengaged as you rock it forward enough and become free from the floor. Then you can push one side forward and the other back and remove the seat from the vehicle. I had to do this to load a large box. good luck
 
1 - 2 of 2 Posts
Top