Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I pushed up the right corner of my rear bumper which binds my rear swing out door, scraping the bumper when opening. I haven’t removed the rear bumper yet. It appears that the left side has about 3/4” clearance. Any help on fixing the problem would be appreciated.
 

·
Premium Member
Joined
·
1,337 Posts
I pushed up the right corner of my rear bumper which binds my rear swing out door, scraping the bumper when opening. I haven’t removed the rear bumper yet. It appears that the left side has about 3/4” clearance. Any help on fixing the problem would be appreciated.
What type of bumper? I had this happen after a harder than I would have like drop onto my AEV rear bumper. Just loosed the bolts, adjusted and re-tighten down as tight as possible. About 130 ft. lbs.
 
1 - 4 of 4 Posts
Top