Jeep Wrangler Forum banner

Reinforce Tie Rod - specific question

2722 Views 7 Replies 4 Participants Last post by  koopzz
Good Evening All;

I have a specific question regarding the "Reinforcing Tie Rod" question.

I know the "slip a metal tube over the tie rod and welding the ends" part. The problem is, and I ensure you I searched: What type of metal tubing do you slip over the tie rod? Nobody has ever gotten into details about that part...

I know if you put too hard of a metal over the Tie Rod you can break the Tie Rod if a "bolder jumps in front of you" - like happened to me :whistling:

I know having a bent tie rod is better then a broken tie rod for sure!

Do I go and get a nice soft pipe like "black pipe?" Perhaps I am just over analyzing this?

Any suggestions are welcome! Any "flames" are not so welcome, but I know I my deserve them :hide:

As always, I look forward to hearing from y'all.

Thanks for your time.

1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.