Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
Hi,

Just relocated my license plate and got a aev + led light holder I bolter on an aev bumper. Spliced the original power source for the light with a longer cable to go under the hood and the bumper... somehow the light does not turn on.

Anything I am missing, shouldn't the original power source (Ground and power) work with the led ligth?

Any help would be appreciated, thanks!


Bob
 

·
Registered
Joined
·
59 Posts
Discussion Starter · #2 ·
Hi,

Just relocated my license plate and got a aev + led light holder I bolter on an aev bumper. Spliced the original power source for the light with a longer cable to go under the hood and the bumper... somehow the light does not turn on.

Anything I am missing, shouldn't the original power source (Ground and power) work with the led ligth?

Any help would be appreciated, thanks!


Bob
Well found the issue... someone thought it would be funny to mix the ground color and set it to white... dumbasses! White with black and black with white on aev license plate holder with led light and a Rubicon JK 2013...
 
1 - 2 of 2 Posts
Top