Jeep Wrangler Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
108 Posts
I have a '90 and all I need is a couple of phillips screw drivers and some people to help lift it off.
 

·
Founder, ThumbJeeps
Joined
·
4,062 Posts
Its a torx bit. Not sure of the size, my tools are at home today :) But I think its a T-40.

Looks like this...

 

·
Registered
Joined
·
10 Posts
Just make sure when you put them back on to put the plate flat side up, I've done it twice with the round side up and they locked up and is a pain to get off, ofcourse it was in the dark so I couldn't really see
 

·
Registered
Joined
·
132 Posts
Discussion Starter #8
I saw on eBay they can replace the screws with a screw that you can take off with out tools,like just by hand.
 
1 - 9 of 9 Posts
Top