Jeep Wrangler Forum banner
1 - 1 of 10 Posts

· Registered
Joined
·
2,456 Posts
It has been awhile, since I took mine out. It seems that there was a catch on the side, to fold it forward, and then release the pins on the floor, and slide seat to the right. It should all come right out. I also removed all the hardware for the seats, seat belts, and put in a fuel cell. But you should not have any problems removing that back seat.
 
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top