Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of January's Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
122 Posts
Check your ground. Did you put the bulb in and then put all 4 screws back in and tighten them up? I don't know if your tail light grounds by the mounting screws, so it's just a guess. If this doesn't work, take the tail light out and unplug the wiring harness at the back of the tail light. Use a test light and see if you have power at the plug.
 
1 - 1 of 1 Posts
Top