Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I recently had to replace my set of license plates but am unable to do so on the front license plate bracket by Maximus-3. I think they used locking nuts welded to the bracket to hold the plate on. I ended up having to cut the bolt heads off to retrieve the old plate despite a lack of rust and copious amounts of penetrating oil.

My question is if there is a way to get the old bolts with the cut heads out so I can re-use the bracket. There is about 1/4" of the old bolt still protruding. Screw taps haven't worked to get the old bolts out.

I've zip-tied my new plate to my grill for now.
 
1 - 1 of 1 Posts
Top