Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
ok found a redeo 44 for a real good deal disk brakes and all, not what to do with the axles/lug pattern redeo is 6 lug 5.5 so do i have it redeilled and think i have to have the flange machined as well to fit the wheel or keep the lug pattern (i don't care having a 6 lug pattern) and change over the front dana 30 question is will wagoner dana 44 knuckles and outters fit the 30 and will the 44 outer stub axles fit the stock 30 inner shafts ?? the plus of doing that is i could get locking hubs back .... strange set up but just seeing if it would work
 
1 - 1 of 1 Posts
Top