[dreamzx93]

I just bought a 97' with 77K on it. I've got some bugs I am trying to work out. When I crank it right off the bat it just turns over and will not crank. However, if I turn the switch to on and wait for a second then crank it she starts up after a few turns.

I think its the fuel pressure regulator. It threw a code a little while back that made me think it was a crank shaft sensor but I erased the code and it has not been back since. That was about 200 miles ago that I erased the code.

Is there anything else it could be other than the FPR?

Thanks for the help guys

 

[Jerry Bransford]

Replacing the FPR is the usual fix for that if the symptoms are that it starts ok if it has been running recently, but that it takes a long time to start if it has been sitting like over night.

 

[dreamzx93]

How hard is that fix never had to do one of those. Had to replace a valve one time in my 300zx because it was pushing gas out the mouth of the tank. That was a scary fix, has anyone done the fpr? How bad is it?

Thanks

 

[JeepWrangler4x4]

ahh threads like this make me wanna change mine so bad! haha mines horrible it drains back in like 5 min of sitting!

 

[harleydragon]

other than dropping the tank it is very easy