Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
So today I hopped in my jeep to run to the store real quick. I backed up to my porch to turn out of my driveway and when i put it in drive and hit the gas i kept going backwards almost hitting my porch. I put it in park and realize the dash still says its in reverse and it was. I shut it off only to realize that i cant turn it back on because its in reverse still (shifter is in the park position). After doing some research i found that the linkage to the transmission was no longer connected (on the drivers side the shifter linkage ends at a lever on the transmission). I was able to push that lever back to get my jeep back into park. Apparently the linkage is held to that lever with a very small piece of plastic (photo attached). I was able to zip tie the 2 pieces together. Does anyone know where i might go about finding one of these plastic pieces or is that a dealership thing? Thank you.
 

Attachments

1 - 1 of 1 Posts
Top