Jeep Wrangler Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter #1
Did it all myself in my garage. Wife wasn't too happy. It was black originally so I had to put the white primer down and then ended up with a "humvee tan" look. I love it







 

·
Registered
Joined
·
76 Posts
Discussion Starter #4
I went down to a local auto paint store and got all the paint and supplies (tape, plastic to hang in garage, ect) for about 300. I bought a paint gun from harbor freight (pros said harbor freight guns are good for a couple uses). I went to work sanding after work on a monday night. I had it all sanded and prepped in a week. I then got a 4 day weekend off work and painted it. So overall about 2 weeks. Well worth it, its a unique jeep now!

If you are thinking about doing it, do it.
 

·
Registered
Joined
·
251 Posts
Rattle can or professional compressor/spray gun job? I really hope you're not spraying clear coat with just a dust mask on, isocyanates is very very hazardous...
 

·
Registered
Joined
·
76 Posts
Discussion Starter #6
All pro, and the mask is an actual respirator, just a one time use. Also no clear coat, left it flat.
 
1 - 8 of 8 Posts
Top