Jeep Wrangler Forum banner
1 - 1 of 1 Posts

284 Posts
Discussion Starter · #1 ·
I received a Sirius Onyx satellite radio receiver for Xmas and am planning the details of the install now and just wanted to see what others have done with their installation of satellite receivers.

My plan is to put the antenna on the roll bar (I've read in another thread that the soft top didn't interfere with the reception) and I was thinking of mounting the cradle on my daystar dash. I will have to run the power cable from the charge, the antenna cable, and the aux line to the line out jack.

Does anyone have any suggestions on the best way to minimize the cables that are showing? I'm thinking of drilling holes in the daystar dash so I can hide some of the wires behind the dash but would like to hear from others who have done it. I also don't have any carpet to hide anything. Thanks!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.