Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of Aug's Ride of the Month Challenge!
1 - 1 of 1 Posts

7 Posts
Discussion Starter · #1 ·
I installed an SPOD in my Wrangler and it really is a nice product. Quick question: I would like to wire two windshield LED spot lights to the same SPOD switch. I would like to join two 16 gauge red wires in the pos fork terminal and two black wires in the neg fork terminal supplied by SPOD but the two wires together are too thick to go into the stud of the supplied fork terminal.

I am using SPOD-supplied fork terminals and I need to know what size they are so I can buy a fork terminal that has the same fork size but can accommodate larger wires. Thanks!

P.S. I tried calling SPOD but as of yet cannot get through.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.