Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Asking for opinions from experience, looking to change out my RE 4.5 springs, looking at either the Currie, Clayton, or Rustys.
 

·
Registered
Joined
·
8,952 Posts
Currie, Clayton, or Rustys.
these are not anywhere near the same ballpark. Generally, speaking, Currie and Clayton are considered top tier. I wouldn't consider Rusty's if they were free.

Also look at Metacloak, Old Man Emu and BDS.

What is important is that you choose a spring of the proper length and spring rate for the desired height and dealing with the weight you carry around.
 

·
Registered
Joined
·
166 Posts
X2 what Unlimited said. I was looking at Currie and Metalcloak for the variable rate. The weight of your Jeep (armor, bumpers, passengers, etc) play into equation as well. Given my rig is a pig, I will be going with higher rate springs. Lots of good info is available when searching for rates and reviews.
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #5 ·
Okay, yeah a buddy had mentioned Rustys and after doing a little research I found they have a very bad reputation. I'll probably go with the Currie or metal cloak.
 
1 - 5 of 5 Posts
Top