Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Ok I made a post yesterday about my jeep stalling and the cel flashing. I played with the spark plug wires and ran ok. This morning same thing. Sputtering and stalling and flashing cel. Pulled over checked wires everything ok. I noticed a lot of condensation around the wires. Is moisture building up over night causing this?
 

·
Registered
Joined
·
100 Posts
The build up of condensation is not uncommon during weather changes but that seems strange. Let's say that's your problem , if so I would look at new wires because they should be sealed and not allow water Into the conductor . Also check your plugs to see if they are tight.
 
1 - 2 of 2 Posts
Top