Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Does anyone have any advice for repairing a vinyl window that was slashed in an attempt to break in? The cuts are not in line of sight so I was hoping to find some type of glue that would weld the edges together if there is such a product.
 

·
Registered
Joined
·
1,979 Posts
I recently read a thread here or at JF where someone posted about cutting most of the window out, except for a small 1 to 2 inch border , and then gluing in some heavy clear vinyl and bonding it to the original edges. I thought that sounded like a good way to go.
 

·
Registered
Joined
·
3,336 Posts
Look for a marine canvas service if you live anywhere near water. They can sew in a new panel.
 

·
Registered
Joined
·
623 Posts
I used clear packing tape. Held up for 2 years no problem. Wasn't pretty, but it certainly was cheap effective.
 
1 - 5 of 5 Posts
Top