Jeep Wrangler Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
Helo gus im installing a sunpro sending unit on my 87 jeep yj so this is what i did tell me pls what im doing wrong so in sunpro fuel gauge a conected black and positive on it and the last terminal from fuel gauge to sending unit and ground the sending unit but all it shows me in the fuel gauge is 1/4 tank but the tank is empty now when i move the floating lever still nothing changes in the fuel gague any help pls n thanks
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #2 ·
Helo guys do i found the problem it was a bad fuel gauge not the sending unit bought new fuel gauge connected power to gauge ground from gauge to sending unit...and s from gauge connected to sending unit and it works now
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top