Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of January's Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Yipeee Kay Ayyy
Joined
·
2,839 Posts
I use stainless steel bolts on mine.
Run the bolts straight through the holes in the tub then reach up behind the tub and put nuts on them.
Can't remember the thread size - just whatever fits through the holes in the tub.
Make sure they are good and tight - the taillights 'earth' through the mounting bolts.
If they don't have a good earth, the tail lights will light up/flash strangely.
 
1 - 1 of 1 Posts
Top