Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of January's Ride of the Month Challenge!
1 - 1 of 1 Posts

4,110 Posts
I use stainless steel bolts on mine.
Run the bolts straight through the holes in the tub then reach up behind the tub and put nuts on them.
Can't remember the thread size - just whatever fits through the holes in the tub.
Make sure they are good and tight - the taillights 'earth' through the mounting bolts.
If they don't have a good earth, the tail lights will light up/flash strangely.
X2. Not a fan of these bit if you like them make sure the bolts make good grounds or you will have many problems down the road.
1 - 1 of 1 Posts