Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
318 Posts
Discussion Starter · #1 ·
im gathering parts to do a v8 conversion. Im going with a ford 302 v8, i have access to an AOD automatic transmission, will a jeep NP231 t case bolt up to the AOD transmission tail housing? Any and all help is appreciated.
 

·
Registered
Joined
·
514 Posts
i dont think it will bolt up i think the spline count may be different as well.. they probably make an adapter.. but why not use the bw1345 that one will bolt up and its plenty strong enough.. if your going with the electronic aod you can goto dakota digital and buy the adapter that will make your speedo work..
 

·
Registered
Joined
·
53 Posts
Novak says:
"Auto trans options for Fords in Jeeps are just not great. The C6 is too long, the AOD is alright but year to year changes stifle adapter developments and requests for C4 swaps into these Jeeps are rare."

I see no adapter listed for the AOD. As CAD said, use the Borg Warner if you can.
 
1 - 5 of 5 Posts
Top