Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter #1
Owns 88 yj 4.2 AX15 231J stock axles what's everyone's thoughts about teraflex revolvers on all four corners. It does have a rough country 4" kit no rear track bar and front reloco bracket and drop pitman arm. I primarily mud but I've been known to crawl a hill or trail or 20 lol.
 

·
Registered
Joined
·
4,757 Posts
If you do a lot of rocks, where extreme flex is involved, the revolvers will add to the wearing out of the bushings on the opposite ends of the springs. i.e.. the back of the front springs and vice versa.

They allow for extreme flex, but it all comes with a price. A few Jeeps in my club have revolvers, and they change the straight bushings a couple times a year, even the poly bushings won't hold up with revolvers. Because of the side to side torque that the revolvers give to the springs.
 
1 - 3 of 3 Posts
Top